Free Shipping on Order Over $50

0

Your Cart is Empty

Look HM 12 D90 Touring 2016 Ski Bindings

When Look decided they needed a tech binding to go along with the Mythic series of light touring skis, they didn't mess around. The Look HM 12 Ski Bindings are Dynafit Radical FT's in all but badging, which is not a bad thing. With a release value adjustment from 5 to 12, three distinct riser positions, and the dialed bi-directional heel release almost every experienced ski tourist has grown to love over the years, the Look HM 12 is a no-brainer addition to your quiver.

  • Toe:  

    Cast alloy baseplate and forged steel toe arms with hardened pins

    Side TowersNew Side Towers aid step-in entry and reduce chances of pre-release from lateral shock.

    Four screw mounting pattern rather than the traditional 5 hole Dynafit pattern

    Toe Release LeverRatcheting toe release lever should be locked for skinning by pulling up.

    Crampon SlotsReinforced crampon slots in baseplate for ski crampons.

  • Heel:

    Alloy pivot post with polymer body and stainless steel heel pins

    Integrated AFD (Anti Friction Device) in brake heel pad

    ReleaseLateral and Vertical release both originate at the heel, and release values are set with separate screws.

    Speed Step Climbing BarNew design climbing bar is super easy to adjust while skinning using a ski pole.

  • Tour Mode:

    Tour mode is accessed for all positions by rotating heel 1/4 turn clockwise. Height adjustment is done by flipping the Speed Step Climbing Bar up or down as needed. On the fly adjustments with a ski pole are simple and precise.

    Toe lever should be in locked position for skinning.

    Heel should only be rotated in clockwise direction.

  • Boot Compatibility:

    Compatible with Tech Boots OnlyTech toe and heel fittings must be installed in your boots in order to use this binding. If in doubt, ask your ski tech.

  • Additional Features:

    One Size Fits AllBinding can be mounted to fit all boot sizes.

    Uses Torx 20 screws instead of PoziDrive #3 screws